POLICAP® abrasive spiral bands with a conical shape. POLICAP® products have a seamless design and the entire surface area can be used. For universal use on steel workpieces (hardened, heat-treated, non-hardened). Specifically developed for special applications, e.g. in tool and die-making and repair. Also works on plastics, wood and fillers in model crafting.
Details
Industrial Subcategory:
Polishing, Finishing and Conditioning
Applications:
Step-by-step fine grinding
Diameter External, Small (In):
Materials that can be worked:
Materials that can be worked 1:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 2:
Materials that can be worked 3:
Steel materials with a hardness > 54 HRC
Materials that can be worked 4:
Steels up to 370 HV (< 38 HRC)
Recommendations for use:
To easily change the abrasive caps and cones, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder clamped in the power tool, and fix in place.
Recommendations for use 1:
For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.
Safety notes:
The maximum permitted peripheral speed is 5,500 SFPM.
Safety notes 1:
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Manufactured By:
Pferd Inc.
Other Details
Consistent shape accuracy and excellent fine grinding due to special manufacturing.
![PFERD POLICAP® Seamless Abrasive Cone, 1/2" x 3-3/8,7/16"Taper,150 Grit,Aluminum oxide](/vendors/6924/large/pch-141185-l-a-150-rgb.png "PFERD POLICAP® Seamless Abrasive Cone, 1/2" x 3-3/8,7/16"Taper,150 Grit,Aluminum oxide")
