Designed for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Specially developed for use with low rotational speeds on cordless drills and power drills. Silicon carbide (SiC) filament brushes are designed for deburring work and surface improvement. Platstic filaments are temperature-resistant up to 410°F.
Details
Industrial Subcategory:
Abrasive Wheels, Discs and Brushes
Applications 3:
Structuring (matt finishing, brush matting and satin finishing)
Diameter Filament Material (In):
MANUFACTURER_TYPE_DESCR:
POS RBU 7510/6,35 SIC 120 Universal
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 11:
Materials that can be worked 12:
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
Materials that can be worked 7:
Materials that can be worked 8:
Materials that can be worked 9:
Steel materials with a hardness > 54 HRC
Recommendations for use:
Please observe the recommended rotational speeds.
Recommendations for use 1:
Use coolant for applications where large amounts of heat are produced.
Recommendations for use 2:
For best performance, use a power tool with a minimum output of 300 watts.
Safety notes:
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
Manufactured By:
Pferd Inc.
Other Details
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Highly flexible, enabling optimal adaptation to the workpiece contour.
![PFERD M-BRAD® Mounted Wheel Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank](/vendors/6924/large/pos-rbu-7510-6-35-sic-80-universal-ohne-ve-rgb.png "PFERD M-BRAD® Mounted Wheel Brush PSF 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank")
